We offer an installation service in most areas

You can enter your postcode on the basket page to see if these services are available to you. We've expanded our rapid installation service to cover most of the country, so your new product can be fitted in your home as soon as possible.

Pricing guide

Freestanding appliances

  • Freestanding wet appliances

    £49

  • Freestanding wet appliances (Connection only)
    (Washing machines, Washer dryers and Dishwashers.)

    £39

  • Freestanding tumble dryers and wine coolers

    £35

  • Freestanding fridges, freezers, fridge freezers
    (Available on all refrigeration - exc. Americans.)

    £35

  • American fridge freezers (Non-plumbed)

    £69

  • American fridge freezers (Non-plumbed) (Connection only)

    £59

  • American fridge freezers (Plumbed)
    (Water supply must be within 3 metres and socket must be within 1 metre of where the appliance will be fitted.)

    £69

  • American fridge freezers (Plumbed) (Connection only)
    (Water supply must be within 3 metres and socket must be within 1 metre of where the appliance will be fitted.)

    £59

  • Electric cookers

    £119

  • Gas cookers

    £139

  • Dual fuel cookers

    £149

  • Electric range cookers

    £149

  • Gas range cookers

    £159

  • Dual fuel range cookers

    £159

We currently do not offer installation of LPG appliances.

Integrated appliances

  • Integrated appliances
    (Available on integrated and built-in appliances: Dishwashers, Washing machines, Washer dryers and Tumble dryers.)

    £139

  • Built-in refrigeration

    £139

  • Coffee machines

    £135

  • Cooker hoods
    (Available on recirculation hoods or hoods with existing ducting.)

    £119

  • Electric ovens

    £119

  • Electric hobs

    £119

  • Gas ovens, Gas hobs

    £149

  • Warming drawers

    £105

We currently do not offer installation of LPG appliances.

Televisions

  • Wall mount (Installation only)

    £80

  • Wall mount (Installation and removal of existing)

    £105

  • TV (Setup only)

    £49

  • TV (Setup and removal of existing)

    £65

Failed connections

If a connection fails because the customer did not inform us of any reason why it may not be successful or because the customer did not comply with the reasons mentioned below, we reserve the right to make a failed connection charge.

Installation guides

Below are some handy guides to help ensure your installation is carried out as smoothly as possible.

Fridge Freezers

As part of this service, we will:

  • Remove the old appliance for recycling.
  • Unpack your new product, remove and recycle the packaging.
  • Remove the plinths and panel door of your old appliance.
  • Do basic carpentry work required e.g. drilling holes.
  • Level and fit neatly in the space.
  • Fit the existing panel door to the new appliance.
  • Connect the new appliance to existing pipework or electrical supply.

Have you checked?

  • The existing housing can accommodate the selected appliance?
  • The appliance selected has the same hinging type as the one installed?

What we do not do:

  • Make any alterations to existing plumbing or electrical connections.
  • Connect the appliance if it puts the fitter or customer at risk.
  • Alter any part of the customers property to gain access.
  • Connect the appliance if it does not meet safety guidelines.
  • Make alterations to stone worktops.
Gas Cookers

As part of this service, we will:

  • Remove the old appliance for recycling.
  • Unpack your new product, remove and recycle the packaging.
  • Remove the plinths and panel door of your old appliance.
  • Do basic carpentry work required e.g. drilling holes.
  • Level and fit neatly in the space.
  • Fit the existing panel door to the new appliance.
  • Connect the new appliance to existing pipework or electrical supply.

Have you checked?

  • That the hot zone is clear of any combustible materials, including sockets and switches?
  • That the appliance selected has the same hinging type as the one installed?
  • That there is gas supply to your kitchen and that you have Natural Gas or LPG supply?
  • Do you have a cooker switch in place (usually a big red switch)? This needs to be positioned outside of the hot zone.
  • Does the room of your choice have adequate ventilation coming into the kitchen (with outside fresh air) through a purposely built vent grille that is suitable for a gas appliance?
  • Do you have a 3-pin power plug (socket or a FUSED spur) within 1.5m of where you want the appliance to be installed, positioned outside the hot zone?
  • Is your existing appliance supplied by the same fuel?

What we do not do:

  • Make any alterations to existing plumbing or electrical connections.
  • Connect the appliance if it puts the fitter or customer at risk.
  • Alter any part of the customers property to gain access.
  • Connect the appliance if it does not meet safety guidelines.
  • Make alterations to stone worktops.
Ovens & Hobs

As part of this service, we will:

  • Remove the old appliance for recycling.
  • Unpack your new product, remove and recycle the packaging.
  • Remove the plinths and panel door of your old appliance.
  • Do basic carpentry work required e.g. drilling holes.
  • Level and fit neatly in the space.
  • Fit the existing panel door to the new appliance.
  • Connect the new appliance to existing pipework or electrical supply.

Have you checked?

  • That the hot zone is clear of any combustible materials, including sockets and switches?
  • That the appliance selected has the same hinging type as the one installed?
  • That there is gas supply to your kitchen and that you have Natural Gas or LPG supply?
  • Do you have a cooker switch in place (usually a big red switch)? This needs to be positioned outside of the hot zone.
  • Does the room of your choice have adequate ventilation coming into the kitchen (with outside fresh air) through a purposely built vent grille that is suitable for a gas appliance?
  • Do you have a 3-pin power plug (socket or a FUSED spur) within 1.5m of where you want the appliance to be installed, positioned outside the hot zone?
  • Is your existing appliance supplied by the same fuel?

What we do not do:

  • Make any alterations to existing plumbing or electrical connections.
  • Connect the appliance if it puts the fitter or customer at risk.
  • Alter any part of the customers property to gain access.
  • Connect the appliance if it does not meet safety guidelines.
  • Make alterations to stone worktops.
Range Cookers

As part of this service, we will:

  • Remove the old appliance for recycling.
  • Unpack your new product, remove and recycle the packaging.
  • Remove the plinths and panel door of your old appliance.
  • Do basic carpentry work required e.g. drilling holes.
  • Level and fit neatly in the space.
  • Fit the existing panel door to the new appliance.
  • Connect the new appliance to existing pipework or electrical supply.

Have you checked?

  • That the hot zone is clear of any combustible materials, including sockets and switches?
  • That the appliance selected has the same hinging type as the one installed?
  • That there is gas supply to your kitchen and that you have Natural Gas or LPG supply?
  • Do you have a cooker switch in place (usually a big red switch)? This needs to be positioned outside of the hot zone.
  • Does the room of your choice have adequate ventilation coming into the kitchen (with outside fresh air) through a purposely built vent grille that is suitable for a gas appliance?
  • Do you have a 3-pin power plug (socket or a FUSED spur) within 1.5m of where you want the appliance to be installed, positioned outside the hot zone?
  • Is your existing appliance supplied by the same fuel?

What we do not do:

  • Make any alterations to existing plumbing or electrical connections.
  • Connect the appliance if it puts the fitter or customer at risk.
  • Alter any part of the customers property to gain access.
  • Connect the appliance if it does not meet safety guidelines.
  • Make alterations to stone worktops.
Washers

As part of this service, we will:

  • Remove the old appliance for recycling.
  • Unpack your new product, remove and recycle the packaging.
  • Remove the plinths and panel door of your old appliance.
  • Do basic carpentry work required e.g. drilling holes.
  • Level and fit neatly in the space.
  • Fit the existing panel door to the new appliance.
  • Connect the new appliance to existing pipework or electrical supply.

Have you checked?

  • That the existing housing could accommodate the selected appliance?
  • Are services accessible (water feed connection, waste pipe connection, electricity connection)?

What we do not do:

  • Make any alterations to existing plumbing or electrical connections.
  • Connect the appliance if it puts the fitter or customer at risk.
  • Alter any part of the customers property to gain access.
  • Connect the appliance if it does not meet safety guidelines.
  • Make alterations to stone worktops.
TV Stand

TV (Setup only)

What this includes:

  • Unpacking and assembly of your TV and removal of packaging.
  • Connecting your TV to your Wi-fi network.
  • Connection of existing devices to your TV, such as Sound bar, Sonos, DVD player or satellite box.
  • Connecting a smart hub TV to the internet.
  • A test demonstration to show that picture and sound are working fully.

What you should know

  • If you need a wall mount installation, please choose the Wall Mount Installation

TV (Setup and removal of existing)

What this includes:

  • Unpacking and assembly of your TV and removal of packaging.
  • Disconnection and removal of existing TV (stand only).
  • Connecting your TV to your Wi-fi network.
  • Connection of existing devices to your TV, such as Sound bar, Sonos, DVD player or satellite box.
  • Connecting a smart hub TV to the internet.
  • A test demonstration to show that picture and sound are working fully.

What you should know

  • If you need a wall mount installation, please choose the Wall Mount Installation
TV Wall Mount TV Wall Mount - Side

Wall mount (Installation only)

What this includes:

  • Unpacking and fitting your wall bracket and removal of packaging.
  • Connecting your TV to your Wi-fi network.
  • Connection of existing devices to your TV, such as Sound bar, Sonos, DVD player or satellite box.
  • Connecting a smart hub TV to the internet.
  • Running the cables neatly along the surface of your chosen installation wall using white trunking.
  • A test demonstration to show that picture and sound are working fully.

What you should know

  • Please note that you'll need to purchase wall brackets from Marks Electrical separately; we can only fit using brackets bought from us.
  • We will only install a fixed bracket with a TV of up to 65" to a plasterboard wall.
  • All TVs over 65" can be installed on a solid wall (concrete, brick).
  • All multi-position brackets can only be installed to a solid wall/dot and dabbed wall.

Wall mount (Installation and removal of existing)

What this includes:

  • Disconnection of your old TV.
  • Unpacking and fitting your wall bracket and removal of packaging.
  • Connecting your TV to your Wi-fi network.
  • Connection of existing devices to your TV, such as Sound bar, Sonos, DVD player or satellite box.
  • Connecting a smart hub TV to the internet.
  • Running the cables neatly along the surface of your chosen installation wall using white trunking.
  • A test demonstration to show that picture and sound are working fully.

What you should know

  • Please note that you'll need to purchase wall brackets from Marks Electrical separately; we can only fit using brackets bought from us.
  • We will only install a fixed bracket with a TV of up to 65" to a plasterboard wall.
  • All TVs over 65" can be installed on a solid wall (concrete, brick).
  • All multi-position brackets can only be installed to a solid wall/dot and dabbed wall.

Here's what you'll need to do before we arrive:

  • Check that you've got the right cables, including any HDMI or power leads.
  • There's a power socket nearby (within 1.5m).
  • You've got your Wi-fi network name and password to hand for a Smart TV set-up.
  • Check that you have added the correct bracket to basket, if we are mounting to a wall.
Talk to us!